Changing the Channel on a Wireless Bird Box Camera

In this article we will walk you through changing the wireless channel on your wireless bird box camera. In a lot of cases this can clear up interference and give you the best possible image.

There’s also a handy video at the bottom of this guide that’s even easier to follow.

  1. Locate the foam rubber bung in the back of the camera
    rubber bung on the back of an ncc701
  2. Remove the bung to expose the 2 small channel switcheschannel switches on an ncc701
  3. Use an opened paper clip, pin or similar to flick the switches either left or right. 
    The different combinations and the channel this sets the camera to are as follows;
    wireless channel configurations

Please bear in mind that the receiver channel will need to be changed to match that of the camera. This is done simply by moving the switch on the size of the unit to the matching channel.

If you’re still having trouble, we have a range of support videos on our YouTube channel, or alternatively, you can get in touch with our technical department. Links for both are available at the bottom of this webpage.